Configuring Basic Features
87
Parameters
Permitted
Values
Default
phone is busy.
0
-Disabled (power indicator LED is off)
1
-Enabled (power indicator LED is solid red)
Web User Interface:
Features->LED->Talk/Dial Power Light On
Phone User Interface:
None
To configure the power Indicator LED via web user interface:
1.
Click on
Features
->
LED
.
2.
Select the desired value from the pull-down list of
Common Power Light On
.
3.
Select the desired value from the pull-down list of
Ringing Power Light Flash.
4.
Select the desired value from the pull-down list of
Voice Mail Power Light Flash
.
5.
Select the desired value from the pull-down list of
Mute Power Light Flash
.
6.
Select the desired value from the pull-down list of
Hold/Held Power Light Flash
.
7.
Select the desired value from the pull-down list of
Talk/Dial Power Light On
.
8.
Click
Confirm
to accept the change.
Contrast
Contrast determines the readability of the texts displayed on the LCD screen. Adjusting the
contrast to a comfortable level can optimize the screen viewing experience. When configured
properly, contrast allows users to read the LCD’s display with minimal eyestrain. You can
configure the LCD’s contrast of T40P and EXP40 connected to T48G/T46G Skype for Business
phones. Make sure the expansion module has been connected to the Skype for Business phone
before adjustment. Contrast is not applicable to T42G/T41P Skype for Business phones.
Summary of Contents for T46G Skype For Business Edition
