Configuring Advanced Features
223
2.
Press or to select a desired paging group.
3.
The default tag is Empty if it is not configured before.
4.
Press the
Option
soft key, and then press the
Edit
soft key.
5.
Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the
Address
field.
6.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
7.
Enter the group name in the
Label
field.
8.
Press the
Save
soft key to accept the change.
9.
Repeat steps 2 to 6, you can add more paging groups.
For
T40P Skype for Business phones,
t
he third line key will change to be a paging list key
automatically. When the phone is idle, you can press the paging list key to access the
paging list.
For T46G/T42G/T41P Skype for Business phones, the second line key will change to be a
paging list key automatically. When the phone is idle, you can press the paging list key to
access the paging list.
For T48G Skype for Business phones: when the phone is idle, you can tap
->
Features
->
Paging list
to access the paging list.
Receiving RTP Stream
Skype for Business phones can receive an RTP stream from the pre-configured multicast
address(es) without involving SIP signaling, and can handle the incoming multicast paging calls
Summary of Contents for T46G Skype For Business Edition
