| Phone Network |
11
Note:
Teams IP Phones comply with the DHCPv4 specifications documented in
, and DHCPv6
.
•
IP Addressing Mode Configuration
•
•
IP Addressing Mode Configuration
The following table lists the parameter you can use to configure IP addressing mode.
Parameter
static.network.ip_address_mode
[1]
<MAC>.cfg
Description
It configures the IP addressing mode.
Permitted Values
0
-IPv4
1
-IPv6
2
-IPv4 & IPv6
Default
0
Web UI
Network
>
Basic
>
Internet Port
>
Mode(IPv4/IPv6)
Phone UI
>
Settings
>
Device Settings
>
Network(Admin only, default password:
admin)
>
WAN Port
>
IP Mode
[1]If you change this parameter, the phone will reboot to make the change take effect.
IPv4 Configuration
The following table lists the parameters you can use to configure IPv4.
Parameter
static.network.internet_port.type
[1]
<MAC>.cfg
Description
It configures the Internet port type for IPv4.
Note
: It works only if“static.network.ip_address_mode” is set to 0 (IPv4) or 2 (IPv4 &
IPv6).
Permitted
Values
0
-DHCP
2
-Static IP Addres
Default
0
Web UI
Network
>
Basic
>
IPv4 Config
>
Configuration Type
Phone UI
>
Settings
>
Device Settings
>
Network(Admin only, default password: admin)
>
WAN Port
>
IPv4 Type
Parameter
static.network.internet_port.ip
[1]
<MAC>.cfg
Description
It configures the IPv4 address.
Example
:
static.network.internet_port.ip = 192.168.1.20
Note
: It works only if “static.network.ip_address_mode” is set to 0 (IPv4) or 2 (IPv4 &
IPv6), and "static.network.internet_port.type" is set to 2 (Static IP Address).
Summary of Contents for Teams Series
Page 1: ......
