| Phone Provisioning |
39
For example, for IPv4: http://192.168.0.10 or 192.168.0.10; for IPv6: http://[2005:1:1:1:215:65ff:fe64:6e0a] or
[2005:1:1:1:215:65ff:fe64:6e0a]
4.
Enter the user name and password.
5.
Click
Login
.
Web Server Type Configuration
Yealink Teams IP phones support both HTTP and HTTPS protocols for accessing the web user interface. You can
configure the web server type. Web server type determines access protocol of the web user interface. If you disable
to access web user interface using the HTTP/HTTPS protocol, both you and the user cannot access the web user
interface.
The following table lists the parameters you can use to configure web server type.
Parameter
static.wui.http_enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the user to access the web user interface of the phone
using the HTTP protocol.
Permitted Values
0
-Disabled
1
-Enabled
Default
1
Web UI
Network
>
Advanced
>
Web Server
>
HTTP
Phone UI
>
Settings
>
Device Settings
>
Network(Admin only, default
password: admin)
>
Web Server
>
HTTP Status
Parameter
static.network.port.http
[1]
<y0000000000xx>.cfg
Description
It configures the HTTP port for the user to access the web user interface of
the phone using the HTTP protocol.
Permitted Values
Integer from 1 to 65535
Default
80
Web UI
Network
>
Advanced
>
Web Server
>
HTTP Port (1~65535)
Phone UI
>
Settings
>
Device Settings
>
Network(Admin only, default
password: admin)
>
Web Server
>
HTTP Port
Parameter
static.wui.https_enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the user to access the web user interface of the phone
using the HTTPS protocol.
Permitted Values
0
-Disabled
1
-Enabled
Default
1
Web UI
Network
>
Advanced
>
Web Server
>
HTTPS
Summary of Contents for Teams Series
Page 1: ......
