Enterprise IP Phone Customizing Your Phone
- 10 -
Customizing Your Phone
General Settings
Phone Status
You can check the network status of your phone by keypad, or check the phone status
by Web interface.
To operate via the keypad, please refer to the above “Network configuration”.
To view the Phone Status via Web interface:
Open the web browsers and input the IP Address http://WAN-ip-address; Enter the
account and password (default account and password are both “admin”), choose Status
directly to check the status.
Audio Setting
Volume
You can adjust the volume of handset/ring tone/signal tone.
To adjust the volume when you are in an active call:
When Handset mode is activated, press the Volume Adjustment Bar to adjust the
volume of signal tone to a comfortable level. When phone is idle, press it to adjust the
volume of ring tone. And during a call, press it to adjust the volume of handset.
Note:
The volume can only be set via the volume adjustment bar on the keypad.
Ring Tone
You can adjust the type and volume of the ring tone.
To change the Ring Tone Type via Web interface:
Choose Phone->Preference->Ring Type, highlight the specific one in the scroll-down
menu, click confirm button to update the change.
Codec Selection
The IP phone supports the following voice codecs:
G723_63
，
G722
，
G726-16
，
G726-24
，
G726-32
，
G726-40
，
PCMA
，
G729
，
PCMU and
