Enterprise IP Phone Using the Basic Phone Functions
- 15 -
To configure Call Forward via Web interface:
Choose Phone->Features->Forward to do the relating changes. Please refer the above
configuration information.
During an Active Call
Mute
This function allows you to mute the microphone of the active audio device during a call;
you can not be heard by the other party. You can still hear all other parties while mute
is enabled.
To mute/resume the conversation:
Press the MUTE button during a conversation to mute the call, and press it again to get
the microphone return to normal conversation.
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
1)
Press the HOLD button to put your active call on hold.
2)
During the call, there will be a "dudu.." sound for each 30 second, suggesting that
there is a call in Hold state.
3)
If there is only one call on hold, press the HOLD button again to retrieve the call.
4)
If there are two calls,
it can only be one call on hold
, press the hold button to switch
between the two calls.
Note:
When you are under the call hold status, putting down the handset, the conversation
will not be hung up, the indication LED will prompt that the conversation is still in
progress. Pick up the handset, it will resume the call automatically.
Call Waiting
This call feature allows your phone to accept other incoming calls to the extension no
matter under which circumstances.
To enable/disable Call Waiting via Web interface:
Choose Phone->Features->Call Waiting to do the relating changes.
Call Transfer
You can customize your phone so that incoming calls are transferred directly to the third
