Administrator’s Guide for Yealink Video Conferencing Systems
204
Parameter
Description
Configuration Method
Contrast
Configures the contrast of the
camera.
Valid Values:
0-100
Default:
For VCC18 camera, the default value
is 45.
For VCC20 camera, the default value
is 7.
Remote Control
Web User Interface
Noise Reduction
(2D)
Specifies the noise reduction (2D)
mode.
Off
Low
Middle
High
Default:
Middle
Remote Control
Web User Interface
Noise Reduction
(3D)
Specifies the noise reduction (3D)
mode of VCC18 camera.
Off
Low
Middle
High
Default:
Off
Note:
It is not applicable to VCC20
camera.
Remote Control
Web User Interface
Hangup Mode
Enables or disables the camera to
flip the image view when camera is
handed at up-side-down position
Default:
Off
Remote Control
Web User Interface
Camera Pan
Direction
Configures the pan direction of the
camera.
Normal
Reversed
Default:
Normal
If the camera reversed mode is
enabled, the camera pan direction
Remote Control
Web User Interface
Summary of Contents for VC120
