Administrator’s Guide for Yealink Video Conferencing Systems
82
Parameter
Description
Configuration Method
address automatically obtained
from the Yealink-supplied
server if the static NAT is set to
Auto
.
Configures the NAT public
address for the system if the
static NAT is set to
Manual
.
Web User Interface
Route Traversal
Configures the route traversal type.
Auto
—NAT works only when
making a call to public network
or receiving a call from the
public network.
Compulsory
—NAT works when
you are in multi-level intranet
network to solve the one-way
audio or video problem.
Default:
Auto
Web User Interface
NAT Traversal
Configures the NAT traversal type.
You can configure it for the SIP
account or SIP IP call separately.
Disabled
STUN
StaticNat
Default:
Disabled
Note:
Static NAT works only if this
parameter is set to StaticNat.
Remote Control
Web User Interface
To configure static NAT via web user interface:
1.
Click on
Network
->
NAT/Firewall
.
2.
Select the desired value from the pull-down list of
Static NAT
.
3.
Configure the NAT public address in the
NAT Public IP Address
field if
Manual
is selected
from the pull-down list of
Static NAT
.
Summary of Contents for VC120
