Enterprise IP Phone Using the Advanced Phone Functions
- 18 -
Using the Advanced Phone Functions
Account Setting
Please refer to the previous part “Configuration and Registration” for the basic account
setting information. The following table lists the instruction of the field about the
advanced Account Setting.
Field Name
Description
UDP
Keep-alive
Message
Defines whether to active the phone UDP Keep-alive
mechanism. The default is Enabled.
UDP
Keep-alive
Interval
This parameter specifies how often the phone will send a packet
to the SIP server. Default is 30 seconds.
Login Expire
This parameter specifies the time frequency that phone
refreshes its registration. The default interval is 3600 seconds.
Local SIP Port
Local SIP port. The default value is 5060.
RPort
The parameter allows you configuring the proxy to send
responses back to a particular address and port. The default is
disabled.
SIP Session Timer
This document defines an extension to the Session Initiation
Protocol (SIP). This extension allows for a periodic refresh of
SIP sessions through a re-INVITE or UPDATE request. The
refresh allows both user agents and proxies to determine if the
SIP session is still active.
Subscribe
Period
This parameter could set the period of the subscription. The
default value is 3600.
DTMF Type
Select the DTMF type.
You can consult your system administrator for more information.
Network Setting
VLAN Setting
VLAN is a group of hosts with a common set of requirements that communicate as if
they were attached to the Broadcast domain, regardless of their physical location. The
following table lists the instruction of the field about the VLAN Setting.
Field Name
Description
Voice QoS
When the network capacity is insufficient, QoS could provide
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
