Administrator’s Guide for VP530 IP
Video
Phone
84
5.
Select the desired line from the pull-down list of Line.
6.
Click Confirm to accept the change.
To configure a group pickup key via phone user interface:
1.
Tap .
2.
Tap the desired DSS key for one second.
3.
Tap the pull-down list of Type and then select Key Event.
4.
Tap the pull-down list of Key Type and then select Group Pickup.
5.
Tap the pull-down list of Account ID and then select the desired line.
6.
Enter the key label in the Label field or leave it blank.
7.
Enter the group pickup feature code in the Value field.
8.
Press the Save soft key to accept the change.
On some specific servers, call pickup is implemented through SIP signals. The IP phones
support to pick up incoming calls via a NOTIFY message with dialog-info event. A user
can pick up an incoming call by pressing a DSS key used to monitor a specific extension
(such as a BLF key).
The example of the dialog-info message carried in NOTIFY message for reference:
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="6" state="full"
entity="sip:1013@10.2.1.199">
<dialog id="706655206@10.2.8.213" call-id="706655206@10.2.8.213" local-tag="827932784"
remote-tag="1887460740" direction="recipient">
Summary of Contents for VP530 IP
