User Guide for the W52 Cordless Phone
46
2. Enter the number or select the handset you want to transfer the call to.
3. Press
or the Transfer soft key.
The call is connected to the number or the handset you specified, and the LCD screen prompts
“Call Transferred”.
To perform a semi-attended transfer via the handset:
1. Press the Options soft key during a call, and then select
Transfer.
You can also press directly.
2. Do one of the following:
•
Enter the number or select the handset you want to transfer the call to.
Press to dial out.
•
Press the
Directory soft key, and then select the desired contact.
Press or the
Call
soft key.
If both the office number and the mobile number of the contact are stored, select
the desired number and press or the
OK
soft key to dial out.
3. Press
or the Transfer soft key to complete the transfer when receiving the ring-back.
The LCD screen prompts “Call Transferred”.
To perform an attended transfer via the handset:
1. Press the Options soft key during a call, and then select
Transfer.
You can also press directly.
2. Do one of the following:
•
Enter the number or select the handset you want to transfer the call to.
Press to dial out.
•
Press the
Directory soft key, and then select the desired contact.
Press or the
Call
soft key.
If both the office number and the mobile number of the contact are stored, select
the desired number and press or the
OK
soft key to dial out.
3. Press
or the Transfer soft key to complete the transfer after the party answers the call.
The LCD screen prompts “Call Transferred”.
To transfer a call to another party when there are two calls on the handset via the handset:
1. Place a call to user A.
2. Place another call to user B.
Two calls are established on the handset.
3. Select the desired call (e.g., the call with user A) and make sure the call is active.
4. Press the
Options soft key, and then select Call Transfer.
The LCD screen displays the target party (user B) you will transfer the call to.
5. Press the
Transfer soft key to complete the transfer.
The LCD screen prompts “Call Transferred”, and then the handset returns to the idle screen. Call is established
between user A and User B.
CALL FEATURES
