manualshive.com logo in svg

Yealink W53P, Administrator'S Manual

The Yealink W53P is a powerful wireless DECT phone system for professional communication needs. Unlock the full potential of this device with the comprehensive Administrator's Manual, available for free download at our 88.208.23.73:8080. This manual provides detailed instructions, setup guidelines, and troubleshooting tips to optimize your user experience.

Share
Download
background image

Administrator’s Guide for W60P/W53P/W41P DECT Phones

42

Common Boot File

Common boot file, named y000000000000.boot, is effective for all phones. You can use a common boot file to apply

common feature settings to all of the phones rather than a single phone.

MAC-Oriented Boot File

MAC-Oriented boot file, named <MAC>.boot. It will only be effective for a specific IP phone. In this way, you have a

high permission to control each phone by making changes on a per-phone basis.

You can create a MAC-Oriented boot file for each phone by making a copy and renaming the boot template file

(y000000000000.boot). For example, if your phone MAC address is 00156574B150, rename the template file as

00156574b150.boot (lowercase).

Tip

MAC address, a unique 12-digit serial number is assigned to each phone. You can obtain it from the bar code on the back

of the IP phone.

Boot File Attributes

The following table lists the attributes you need to know in the boot template file.

Attributes

Description

#!version:1.0.0.1

It must be placed in the first line. Do not edit and delete.

include:config <xxx.cfg>

include:config "xxx.cfg"

Each “include” statement can specify a location of a configuration file. The con-

figuration file format must be *.cfg.

The locations in the angle brackets or double quotation marks support two forms:

l

Relative path (relative to the boot file):

For example, sip.cfg, HTTP Directory/sip.cfg

l

Absolute path (or URL):

For example, http://10.2.5.258/HTTP Directory/sip.cfg

The location must point to a specific CFG file.

overwrite_mode

Enable or disable the overwrite mode. The overwrite mode applies to the con-

figuration files specified in the boot file. Note that it only affects the parameters

pre-provisioned via central provisioning.

1

-(Enabled) - If the value of a parameter in configuration files is left blank, or if a

non-static parameter in configuration files is deleted or commented out, the fact-

ory default value takes effect.

0

-(Disabled) - If the value of a parameter in configuration files is left blank, deleted

or commented out, the pre-configured value is kept.

Note

: Overwrite mode can only be used in boot files. If a boot file is used but “over-

write_mode” is not configured, the overwrite mode is enabled by default.

Tip

The line beginning with “#” is considered to be a comment. You can use “#” to make any comment in the boot file.

Customizing a Boot File

Procedure

Summary of Contents for W53P









































































































































































































































































Reviews:

No comments

Related manuals for W53P

Samsung DS 24D Quick Reference Manual preview
DS 24D
Brand: Samsung Pages: 6
Panasonic KX-TG5421 Operating Instructions Manual preview
KX-TG5421
Brand: Panasonic Pages: 68
Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008... Programing Manual preview
KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008...
Brand: Panasonic Pages: 66
Binatone SYMPHONY 3325 User Manual preview
SYMPHONY 3325
Brand: Binatone Pages: 2
Ciro Cybercharger Quick Start Manual preview
Cybercharger
Brand: Ciro Pages: 2
VTech LS6475-2 Quick Start Manual preview
LS6475-2
Brand: VTech Pages: 2
Bestway Hydro-Force 62195 Manual preview
Hydro-Force 62195
Brand: Bestway Pages: 6
Binatone Lyris 710 User Manual preview
Lyris 710
Brand: Binatone Pages: 32
Uniden EXAI378 Owner'S Manual preview
EXAI378
Brand: Uniden Pages: 68
TIPTEL 6240 User Manual preview
6240
Brand: TIPTEL Pages: 28
FLORABEST FAAS 10.8 A1 Operation And Safety Notes preview
FAAS 10.8 A1
Brand: FLORABEST Pages: 55
EnGenius SP-935 User Manual preview
SP-935
Brand: EnGenius Pages: 38
Uniden DS73 Owner'S Manual preview
DS73
Brand: Uniden Pages: 36
Comdial ExecuTech 0616 Series User Manual preview
ExecuTech 0616 Series
Brand: Comdial Pages: 52
Doro 8075 User Manual preview
8075
Brand: Doro Pages: 32
Doro 850 colour Manual preview
850 colour
Brand: Doro Pages: 44
Doro 550S Manual preview
550S
Brand: Doro Pages: 40
Doro 130R Manual preview
130R
Brand: Doro Pages: 36

Brands by name

Popular brands

Load more brands