| Call Features |
23
Procedure
Do one of the following:
• Press the
Reg
soft key on the handset to register quickly.
• Press
OK
>
Register Handset
and then select the desired base to register the handset.
• Navigate to
OK
>
Settings
>
Registration
>
Register Handset
and then select the desired base to
register the handset.
After registration, the handset prompts “Handset Subscribed”.
Note:
The default base PIN is 0000.
Selecting a DM/Base Station to Connect
You can connect the handset to a desired DM/base station manually, or allow the handset to connect the
registered DM/base with the greatest signal strength automatically.
About this task
It is only applicable to W56H/W53H.
Procedure
1.
Navigate to
OK
>
Settings
>
Registration
>
Select Base
.
The phone screen displays all DMs/base stations that the handset is registered to and the
Bestbase
option.
2.
Select the desired DM/base station or
Bestbase
, and then press
Select
.
Call Features
You can use the phone to place and answer calls, ignore incoming calls, transfer a call to someone else,
conduct a conference call and perform other basic call features.
•
•
•
•
Silencing or Rejecting Incoming Calls
•
•
•
•
•
•
•
Placing Calls
After the handset is registered successfully, you can use your handset to place an external call.
The handset can keep 2 calls at one time at almost, one (associated with the audio) active and the other
one on hold.