Administrator’s Guide for W60P/W53P/W41P DECT Phones
142
Off Hook Hot Line Dialing
For security reasons, IP phones support off hook hot line dialing feature, which allows the phone to first dial out the
pre-configured number when you dial out a call using the account with this feature enabled. The SIP server may then
prompts you to enter an activation code for call service. Only if you enter a valid activation code, the IP phone will use
this account to dial out a call successfully.
Off hook hot line dialing feature is configurable on a per-line basis and depends on support from a SIP server. The
server actions may vary from different servers.
It is also applicable to the IP call and intercom call.
Note
Off hook hot line dialing feature limits the call-out permission of this account and disables the hotline feature. For
example, when the phone goes off-hook using the account with this feature enabled, the configured hotline number will
not be dialed out automatically.
Topic
Off Hook Hot Line Dialing Configuration
Off Hook Hot Line Dialing Configuration
The following table lists the parameters you can use to configure off hook hot line dialing.
Parameter
account.X.auto_dial_enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to first dial out a pre-configured number when a user dials out a
call using account X.
Permitted Val-
ues
0
-Disabled
1
-Enabled, the phone will first dial out the pre-configured number (configured by the parameter
“account.X.auto_dial_num”).
Default
0
Parameter
account.X.auto_dial_num
[1]
<MAC>.cfg
Description
It configures the number that the IP phone first dials out when a user dials out a call using account X.
Note
: It works only if “account.X.auto_dial_enable” is set to 1 (Enabled).
Permitted Val-
ues
String within 1024 characters
Default
Blank
[1]
X is the account ID. X=1-8.
Call Timeout
Call timeout defines a specific period of time after which the IP phone will cancel the dialing if the call is not answered.
Topic
Call Timeout Configuration
The following table lists the parameter you can use to configure call timeout.
Summary of Contents for W60P Telesystem
