Administrator’s Guide for W60P/W53P/W41P DECT Phones
48
Accessing the Web User Interface
Procedure
1.
Find the phone IP address. For DD phone, press the OK key when the phone is idle or navigate to
Menu
->
Status
on the phone; For W53P/W60P, press the OK key, and then navigate to
Status
->
Base
.
2.
Enter the IP address in the address bar of a web browser on your PC.
For example, for IPv4: http://192.168.0.10 or 192.168.0.10; for IPv6: http://[2005:1:1:1:215:65ff:fe64:6e0a] or
[2005:1:1:1:215:65ff:fe64:6e0a]
3.
Enter the user name and password.
4.
Click
Login
.
Related Topics
User and Administrator Identification
Quick Login Configuration
You can access to the web user interface quickly using the request URI “https://username:password@phoneIPAddress”
(for example, https://admin:admin@192.168.0.10). It will locate you in the
Status
web page after accessing the web
user interface. It is helpful to quickly log into the web user interface without entering the username and password in
the login page.
Yealink IP phones support domain name customization. You can use a custom domain name to access the web user
interface.
Note
Accessing the web user interface by request URI may be restricted by the web explorer (e.g., Internet Explorer).
For security purposes, we recommend you to use this feature in a secure network environment.
The following table lists the parameters you can use to configure quick login.
Parameter
wui.quick_login
<y0000000000xx>.cfg
Description
It enables or disables the quick login feature.
Note
: It works only if “static.wui.https_enable” is set to 1 (Enabled).
Permitted
Values
0
-Disabled
1
-Enabled, you can quickly log into the web user interface using a request URI (for example, https://ad-
min:admin@192.168.0.10).
Default
0
Parameter
wui.secure_domain_list
<y0000000000xx>.cfg
Description
It configures the valid domain name to access the web user interface of the IP phone.
Multiple domain names are separated by semicolons.
Example
:
wui.secure_domain_list = test.abc.com
You are only allowed to use test.abc.com or IP address to access the web user interface of the IP phone.
Note
: To use a domain name to access the web user interface of the IP phone, make sure your DNS server
Summary of Contents for W60P Telesystem
