11
Horizon
/
Yealink W73P User Guide
Troubleshooting
The W73H handset will alert you if registration has not been completed. Common reasons why
registration fails include:
1.
Incorrect base PIN has been entered
2.
Base station is out of range
3.
Base station is not in registration mode
Deregistering a handset
1.
Go to
OK
>
Settings
>
Registration
>
De-reg. Handset
.
2.
Enter the base PIN (default: 0000), and then press
Done
or
OK
. The handset screen displays
the handsets names that are registered to the same base station. The name of the handset itself
is highlighted and followed by a left arrow.
3.
Select the desired handset, and then press
OK
. The handset screen prompts you whether to de-
register the handset.
4.
Confirm the action.
Placing a Call
After the handset is registered to the base station, you can use your handset to place an internal or
external call.
The handset can handle 2 calls at the same time.
Placing an Internal call (Intercom)
Intercom is a useful feature in the office to quickly contact a colleague. Intercom calls are made
between handsets registered to the same base station.
The following types of auto intercom feature are available:
•
On (Beep On):
The handset answers an intercom call automatically and plays a warning
tone.
•
On (Beep Off):
The handset answers an intercom call automatically without a warning tone.
•
Off:
Auto intercom feature is off. You need to answer an intercom call manually.
To select which auto intercom you wish to use, go to
OK
>
Settings
>
Telephony
>
Auto Intercom
and select the desired option.
To place the call, go to
OK
>
Intercom
and select the
desired handset
or
All Handsets
and select
OK
or the
Off-hook key
. Selecting All Handsets will ring all other registered handsets to that base
station simultaneously.
