| Customizing Your Phone |
72
4.
Select the desired type from the
Lock type
field.
5.
Enter the desired interval (0 - 3600 seconds) in the
Lock Time Out
field.
If the value is set to 0, the phone will not be automatically locked.
6.
Confirm the action.
Locking Your Phone Manually
You can lock the phone manually before the phone is automatically locked.
Before you begin
Make sure that the phone lock is set.
Procedure
Long press # key when the phone is idle.
The lock icon appears on the phone screen.
Unlocking Your Phone
You can use an unlock PIN to unlock the phone.
About this task
If you forget the unlock PIN, you can enter the administrator password to unlock your phone, and then
automatically access the PIN change screen.
Procedure
1.
Press any locked key, the phone prompts you to enter an unlock PIN.
2.
Enter the desired PIN (default: 123) in the
Unlock PIN
field.
3.
Confirm the action.
The lock icon disappears from the phone screen.
Changing Your Phone Unlock PIN
The default unlock PIN is “123”. For security reasons, you should change the default unlock PIN as soon as
possible.
Procedure
1.
Go to
Menu
>
Settings
>
Basic Settings
>
Change PIN
.
2.
Enter your old and new unlock PIN respectively.
The unlock PIN length must be within 15 digits.
3.
Confirm the action.
Silent Mode
You can enable the silent mode if you do not want to be disturbed. The handset will not ring when receiving
an incoming call, but it will still display the incoming call information.
It is only applicable to W56H/W53H.
•
Summary of Contents for W78H
