| Call Features |
32
Procedure
1.
Go to
OK
>
Call Features
>
Anon.Call Rejection
.
On the CP930W, go to
Menu
>
Features
>
Anon.Call Rejection
.
On the DD phone, go to
Menu
>
Features
>
Anonymous Call
.
2.
Enable local anonymous rejection.
3.
Confirm the action.
Rejecting Calls with Do Not Disturb (DND)
You can enable DND to reject all incoming calls automatically when you do not want to be interrupted.
Before you begin
Check with your system administrator to find out if the DND feature is available on your phone.
Procedure
1.
Go to
OK
>
Call Features
>
Do Not Disturb
.
On the CP930W/DD phone, go to
Menu
>
Features
>
DND
.
2.
Enable DND.
3.
Confirm the action.
The status bar displays the DND icon.
Note:
On the CP930W/DD phone, to activate or deactivate DND quickly, select
DND
when the
phone is idle.
You can press the
Line
soft key when the handset is idle to check the line status.
Ending Calls
You can end the current call at any time.
Procedure
Press
or
End Call
or
End
.
Muting/Unmuting Audio
You can mute the microphone during an active call so that the other party cannot hear your discussion with
your colleagues.
Procedure
1.
Press the mute key during a call to mute the microphone.
The mute icon appears on the phone screen. On the CP930W, the mute touch key LEDs change from
green to red.
2.
Press the mute key again to unmute.
The mute icon disappears from the phone screen. On the CP930W, the mute touch key LEDs change
from red to green.
