E
N
G
L
I
S
H
5
•
If there is more than one call on hold, press
or
to select the desired call, and then press
the
Resume
soft key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press
or the
Tran
soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press
or the
Tran
soft key.
Semi-Attended Transfer
1. Press
or the
Tran
soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
.
3. Press
or the
Tran
soft key when you hear the ring-back tone.
Attended Transfer
1. Press
or the
Tran
soft key during a call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
.
3. Press
or the
Tran
soft key when the second party answers.
Call Forward
To enable call forward:
1. Press the
Menu
soft key when the phone is idle, and then select
Features
->
Call Forward
.
2. Select the desired forward type:
Always Forward
----Incoming calls are forwarded unconditionally.
Busy Forward
----Incoming calls are forwarded if the phone is busy.
No Answer Forward
----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For
No Answer Forward
, press
or
to select the
ring time to wait before forwarding.
4. Press the
Save
soft key to accept the change.
Call Conference
1. Press the
Conf
soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the
Send
soft key.
3. Press the
Conf
soft key again when the second party answers. All parties are now joined in the
conference.
4. Press the
Cancel
soft key to disconnect all parties.
Note:
You can split the conference call into two individual calls by pressing the
Split
soft key.
Speed Dial
To configure a speed dial key:
1. Press the
Menu
soft key when the phone is idle, and then select
Features
->
DSS Keys
.
2. Select the desired line key, and then press the
Enter
soft key.
3. Select
Speed Dial
from the
Type
field, select the desired line from the
Account ID
field, and
enter the number in the
Value
field.
4. Press the
Save
soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
