User Guide for the SIP-T41P IP Phone
116
2.
Press or to select a desired paging group.
The default tag is Empty if it is not configured before.
3.
Press the Option soft key and then press the Edit soft key.
4.
Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the
Address field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
5.
Enter the group name in the Label field.
6.
Press the Save soft key to accept the change.
7.
Repeat steps 2 to 6, you can add more paging groups.
Paging list is configurable via web user interface at the path: Directory->Multicast IP.
To delete a paging group via phone user interface:
1.
Press the paging list key when the phone is idle.
2.
Press or to select a desired group.
3.
Press the Option soft key and then select Delete.
The LCD screen prompts “Delete selected paging group?”.
4.
Press the OK soft key to accept the change or the Cancel soft key to cancel.
If you want to delete all paging groups, you can press the Del All soft key.
You can also configure the phone to use a default codec for sending multicast RTP
stream via web user interface.
To configure a default codec for multicast paging via web user interface:
1.
Click on Features->General Information.
Summary of Contents for Yealink SIP-T41P
Page 1: ......
Page 22: ...User Guide for the SIP T41P IP Phone 10...
Page 160: ...User Guide for the SIP T41P IP Phone 148...
