Getting Started
15
2) Connect the handset and optional headset
Note
3) Connect the network and power
You have two options for power and network connections. Your system administrator will
advise you which one to use.
AC power (Optional)
Power over Ethernet (PoE)
AC Power (Optional)
To connect the AC power:
1.
Connect the DC plug on the power adapter to the DC5V port on the phone and
connect the other end of the power adapter into an electrical power outlet.
2.
Connect the included or a standard Ethernet cable between the Internet port on the
phone and the one on the wall or switch/hub device port.
Note
EHS36 is used for connecting the phone and a compatible wireless headset. For more
information on how to use EHS36, refer to
Yealink EHS36 User Guide
.
The IP phone should be used with Yealink original power adapter (5V/1.2A) only.
The use
of the third-party power adapter may cause the damage to the phone.
Summary of Contents for Yealink SIP-T41P
Page 1: ......
Page 22: ...User Guide for the SIP T41P IP Phone 10...
Page 160: ...User Guide for the SIP T41P IP Phone 148...