Yealink SIP-T42G
Ultra-elegant Gigabit IP Phone
Quick Reference User Guide
Page 4 | Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)
Copyright © Telair Pty Ltd (ABN 92 119 713 745) | www.telair.com.au | 1800 telair (835 247)
REDIAL A NUMBER
To call the last dialled number:
•
Press
twice when the phone is idle to dial the last dialled number.
To call a previously dialled number:
1. Press
to enter the Placed Calls list.
2. Press
or
until you reach the desired entry in the list.
3. Press
or the
Send
soft key to place the call.
MUTE OR UN-MUTE A CALL
•
Press
to mute or un-mute an active call.
FORWARD A CALL
1. Press the
Menu
soft key.
2. Select
Features
and then
Call Forward.
3. Select the desired forward type:
Always Forward, Busy Forward,
or
No Answer Forward.
4. Enter the destination number you wish to forward calls to.
•
For
No Answer Forward,
press
or
to select the desired ring time.
•
Press the
Save
soft key to accept the change.
CREATE A CONFERENCE CALL
1. Press the
Conf
soft key during an active call. This will place the call on hold.
2. Enter the extension or external number of the second party, then press the
Send
soft key.
3. Press the
Conf
soft key again when the second party has answered the call.
•
All parties are now joined in the conference call.
4. Press the
End Call
soft key to disconnect all parties.
PLACE A CALL ON HOLD & THEN RESUME THE CALL
To place a call on hold:
•
Press the
Hold
soft key during an active call.
To resume a call from hold:
•
Press
Resume
soft key when a call is on hold.
If there is more than 1 call on hold:
•
Press
or
to select the desired held call, then press the
Resume
soft key to retrieve the
desired call.
How to (cont...):
