http://www.ysvacuumsealer.com
8
length from bag roll.
Make sure to cut in a straight line.
2. Open lid. Place one end of cut bag onto sealing strip.
3. Close lid firmly by pressing down firmly on both sides until two “click” sound heard. If
the lid can not be lifted, then you have successfully locked the lid in place.
NOTE: The sealing strip will NOT work properly unless you lock the lid. Ensure that the lid
has been locked on both sides for proper sealing.
4. Now that the lid has been locked, press the “
Seal Only
” button to create a custom
sized bag. The indicator light illuminates during the seal process.
5. Once completed the indicator light will turn off; press the release buttons on both sides
of the machine, it is now safe to take out the newly created bag.
6. The custom sized bag is now ready for vacuum sealing.
CAUTION: Make sure you give the appliance time to cool down. Wait at least 20 seconds
between seals. Under very heavy usage, appliance will shut off automatically to prevent
overheating. If it does, wait 20 minutes to allow appliance to cool off.
How to Vacuum Seal with the Vacuum Bags
1. Place the item(s) to be sealed into the pre-cut or custom sized bag. Leave at least 2
inches between the contents and the top of the bag to allow for bag contraction.
2. Open lid and place the open end of the bag down into the Vacuum channel.
3. Close lid firmly by pressing down firmly on both sides, check to make sure that the lid
will not open. If the lid can not be lifted, then you have successfully locked the lid in
place.
4. To begin the vacuum process, press the ”
Vacuum & Seal
” button. The unit will
continue to vacuum and then seal once air has been removed.
5. Once the indicator light has turned off, press the release buttons on both sides of the
machine to release the bag.
How to Use the Vacuum Sealer with a Canister
NOTE :
Canister is not included, accessory hose may not fit all canister lids.
1. Wipe canister cover, canister base and ensure they are clean and dry.
2. Place food into canister and leave at least one inch of space between food and cover.
3. Place cover onto canister, insert one end of accessory hose into port on appliance.
Put the other end onto canister port ; pressing down firmly to ensure a tight fit.
4. Close lid by pressing down on both sides. If the lid cannot be lifted, then you have
