MyPBX U300 Administrator Guide
10
Web Configuration Panel
There are 5 main sections on the Web Configuration Panel for users to check the
MyPBX U300
’s status and configure it.
Status:
check System Status, Extension Status, Trunk Status, Network Status.
System:
configure Network Settings, Security related Settings, System Date and
Time, Password, Backup and Restore, Storage Management, Recording Settings
etc.
PBX:
configure extensions, PSTN trunks, Call Routing, Call Features, Audio
Settings, Voicemail Settings, SIP Settings etc.
Reports:
check system logs and call logs.
Addons
: activate and manage MyPBX addons, including Call Recording, MyPBX
Client, Billing System and Hotle Module.
Logout:
log out MyPBX U300.
Note:
After saving the changes, remember to click the “Apply changes” button on the upper
right of the Web GUI to makethe changes take effect.
User Management
MyPBX U300supports 4 user types with different privileges.
User Privileges
Administrator
has the highest privilege. The administrator can access all pages
on MyPBX U300 Web and make all the configurations on the system.
Username:
admin
Default Password:
password
User Administrator
has basic privileges; do not have the permission to create
VoIP trunks, reset, update, backup and restore MyPBX.
CDR Administrator
only has the permission to manage call logs.
Extension User
has the privilege to check voicemails, and one-touch recordings.
Username:
Extension number (i.e.601)
Default Password:
Extension number (i.e. 601)
The password is the same as
“Voicemail Access PIN” and can be changed on
extension edit page.
Making and Receiving Calls
The MyPBX default settings are sufficient to make phone calls. It is not necessary to
makeany changes unless the user wants to create new extensions or trunks.
