MyPBX U300 Administrator Guide
14
you want to transfer the call to an outbound number, please
follow the dial pattern of outbound route filled in the outbound
number.
For example: transferring to your mobile phone number
123456789, the dial pattern of outbound route is
“9.”, you should
fill in 9123456789 here.
Volume Settings
Rxgain
The Volume sent to FXS extension.
Txgain
The Volume sent out by the FXS extension.
Mobility Extension
MyPBX allows you to use your mobile phone as an extension. If
you set your mobile phone as a mobility extension and then you
call MyPBX with this mobile phone, you will hear a dial tone.
MyPBX will recognize your call as a call from an extension. You
can dial the number of other extensions (your caller ID will be
the number of your extension) or dial out via outbound routes
just like dialing from your extension.
Note
:
If callback is enabled in the inbound route, the mobility
extension function of this inbound route will be disabled.
Enable Mobility Extension
Enable this feature.
Mobility Extension Number
When you dial the server with this number, the mobile
phone gets the permission of the extension. For example:
dialing the other extensions, playing the voicemail.
Ring Simultaneously
When the extension has an incoming call, it rings its mobility
extension simultaneously.
Note:
MyPBX doesn
’
t support the PSTN line for Ring
Simultaneously.
Outbound Prefix
Fill in proper prefix of mobile number so that it can match an
outbound route to dial the mobility extension. For example,
if you set the prefix 9, it will send “9+ mobility extension
number” to the outbound route.
Caller ID Type
Normally, you choose the “default” option except for using
MyPBX U300 in Japan, in which case you should choose
“Japan”.
Spy Settings
There are 4 spy modes available:
General spy
You have the permission to use the following 3 modes.
Normal spy
You can only hear the call, but can't talk
