MyPBX U300 Administrator Guide
18
call MyPBX with this mobile phone, you will hear a dial tone.
MyPBX will recognize your call as a call from an extension. You
can dial the number of other extensions (your caller ID will be
the number of your extension) or dial out via outbound routes
just like dialing from your extension.
Note
:
if callback is enabled in the inbound route, the mobility
extension function of this inbound route will be disabled.
Enable Mobility Extension
Enable this feature.
Mobility Extension Number
When you dial the server with this number, the mobile
phone gets the permission of the extension. For example:
dialing the other extensions, playing the voicemail.
Ring Simultaneously
When the extension has an incoming call, it rings its mobility
extension simultaneously.
Note:
MyPBX doesn
’t support the PSTN line for Ring
Simultaneously.
Outbound Prefix
Fill in proper prefix of mobile number so that it can match an
outbound route to dial the mobility extension. For example,
if you set the prefix 9, it will send “9+ mobility extension
number” to the outbound route.
Spy Settings
There are 4 spy modes available:
General spy
You have the permission to use the following 3 modes.
Normal spy
You can only hear the call, but can't talk.
Whisper spy
You can hear the call, and can talk with the monitored
extension.
Barge spy
You can hear the call and talk with them both.
Example:
If 500 want to monitor extension 501, we need to enable the
“allow being spied” for 501, and choose the spy mode for
extension 500.
Then pick up 500 and dial “feature codes + 501” to start
monitoring when 501 is in a call.
If 500 choose
“normal spy”, it should dial “*90501” to start
monitoring.
If 500 choose
“whisper spy”, it should dial “*91501” to start
monitoring.
