MyPBX U300 Administrator Guide
33
Figure 6-10 MFC/R2 General Settings
Table 6-8 Description of MFC/R2 General Settings
General
Trunk Name
A unique label used to identify this trunk.
Signaling
Choose the signaling.
MFC/R2
Variant
Set the MFC/R2 variant value:
ITU
Argentina
Brazil
Czech Republic
Colombia
Mexico
Philippines
Venezuela
MAX ANI
Max amount of ANI to ask for.
Charge Calls
Whether or not report to the other end accept call with
charge. This setting has no effect with most telcos,
usually is safe leave the default (yes), but once in a while
when interconnecting with old PBXs this may be useful.
Concretely this affects the Group B signal used to accept
calls.
MAX DNIS
Max amount of DNIS to ask for.
MF Back Timeout
MFC/R2 value in milliseconds for the MF timeout.
Get ANI First
Whether or not to get the ANI before getting DNIS. Some
telcos require ANI first some others do not care if this
goes wrong.
Double Answer
This
feature
is
related
but
independent
of
mfcr2_allow_collect_calls.
Some
PBXs
require
a
double-answer process to block collect calls, if you ever
have problems blocking collect calls using Group B
signals(allow_collect_calls=no) then you may want to try
