MyPBX U300 Administrator Guide
77
Member Outbound Route
Choose outbound routes for the PIN user. Users who are not in the outbound
routes could use the outbound route to make external calls by
“PIN User”.
Callback
Callback feature allows callers to hang up and get called back to MyPBX. Callback
feature could reduce the cost for the users who work out of the office using their own
mobile phones.
Enabling Callback
Callback requires you to enable it on an inbound route.W hen you call in MyPBX
through the inbound route and hang up the call. MyPBX will call you back and
direct you to the selected destination on the inbound route.
Figure 15-5 Enable Callback
Callback Settings
Callback can be configured on
PBX→Advanced Settings→Callback Settings
page.
Notes:
1. If you'd like to use callback feature, please make sure it's enabled on the inbound
route setting panel.
2. No callback rules needed to be set if the trunk supports call back with the caller ID
directly.
