MyPBX U300 Administrator Guide
80
Settings.
Response Timeout
The maximum amount of time the system will wait before hanging up the call if the
user has dialed an incomplete or invalid number. The default is 10 seconds.
Digit Timeout
The maximum amount of time permitted between each digit when the user is
dialing an extension number. The default is 5 seconds.
Member Outbound Routes
Used to set the outbound routes that can be access from this DISA.
Applying to an Inbound Route
A DISA can be selected as a destination in an inbound route. Once the caller call in
MyPBX through the inbound route, he/she will get a dial tone or a dial tone aft er
inputting a correct PIN code, the caller are able to use trunks on MyPBX to make
external calls.
Figure 15-10 Choose DISA on Inbound Route
