MyPBX U300 Administrator Guide
82
PBX Basic Settings
This chapter explains PBX basic settings, which can be applied globally to MyPBX
U300. The basic settings can be configured under
PBX→Basic Settings
.
General Preferences
1) General Settings
Table 16-1 General Preferences-General
General Settings
Max Duration
The absolute maximum amount of time permitted for a call. A
setting of 0 disables the timeout. The default value is 6000s.
Maximum Concurrent
Calls
Maximum concurrent calls limits. The default value 0 means no
limit.
Music On Hold
Used to set hold music for the system.
Tone Region
Select country to set the default tones (dial tone, busy tone, ring
tone etc.) to be sent from FXS port.
The default setting is United States/North America.
Dsp Fax
Enable Dsp to optimize Fax reception.
FXO Mode
Select country to set the On Hook Speed, Ringer Impedance,
Ringer Threshold, Current Limiting, TIP/RING voltage
adjustment, Minimum Operational Loop Current, and AC
Impedance as predefined for your country's analog line
characteristics.
The default setting is FCC for USA.
Attended Transfer
Caller ID
When transferring an incoming call using the attended transfer
feature code or the transfer key of IP phone, the Caller ID of
transferee or transferer displayed on the screen of the callee.
The default display is the Caller ID of the initiator.
Follow Me Prompt
If “Enable Follow Me Prompt” choosing “Yes”, there will be
prompt before transferring the call. Otherwise, the call will be
transferred directly without any prompt. Default: Yes.
Music on hold for
Follow Me
The user could choose to play default music-on-hold, ringing
tone or stay mute when forwarding the call.
Invalid Phone Number
Prompt
Configure the prompt when the dialed phone number is invalid.
Busy Line Prompt
Configure the prompt when the dialed phone number is busy.
Dial Failure Prompt
Configure the prompt when dial failed due to conjunction
