N412 Installation Guide
7
Power Connection
Connect the power adapter to the N412
’s power port, and then plug the power socket
into an electrical outlet. The device will start booting. In the meantime, users would
see that the
“POWER” and “RUN” indicator lights turn on.
Note:
please switch off the power before plugging or unplugging the cables.
4. Basic Configurations
4.1Web Interface Login
Yeastar N412 provides a web-based configuration interface for administrator and
account user. The user can manage the device by logging in the Web interface.
Access path:
http://192.168.5.150
User Name:
admin
Password:
password
Start the browser on PC. In the address bar, enter the IP address, click
“Enter” button
and then you can see Web Configuration Panel login page. Enter the Admin User
Name and Password to log in.
Figure 4-2 TA Web Configuration Panel Login Page
Via the configuration interface, the admin can make all the system configurations,
including network settings (LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system
parameters configuration (time zone, password, etc.); internal settings (Web access
port, etc.); FXS ports list; FXO ports list; Hunting Groups; Hotline; call logs (search,
download); firmware update and reset, etc.
Note:
a
fter saving the changes, remember to click the “Apply changes” button to
make the changes take effect.
