How to Connect Trixbox to NeoGate TA FXS Gateway
11/15
seen.
Figure 12. SIP Trunk Status
Step 2. Edit one VoIP Server template as SPS mode.
Path:
Gateway
→
VoIP Settings
→
VoIP Server Settings
Do not check "Enable Register"
, choose SIP protocol, and fill in the Trixbox IP
address, the VoIP server template will be configured as SPS mode.
Figure 13. Configure the VoIP Server Template as SPS Mode
Server Name:
Trixbox
Type:
SIP
Enable Register:
DO NOT check
Transport:
UDP
Hostname/IP:
fill in Trixbox's IP address, 192.168.5.236
Domain:
fill in Trixbox's IP address, 192.168.5.236
