How to Connect Trixbox to NeoGate TA FXS Gateway
15/15
Step 5. Create one outbound route on Trixbox.
To make calls from Trixbox to NeoGate TA3200, you need to create one
outbound route on Trixbox.
Path:
PBX
→
PBX Settings
→
Outbound Routes
→
Add Route
Figure 18. Add Outbound Route
Set the dial pattern as X., choose the trunk "NeoGate_TA3200" which is created
above. In this guide, you should dial 100 to call the phone which is connected to
TA3200 FXS port 1.
<End>