NeoGate TG Series Installation Guide
12/16
1.
Connect the antenna.
Connect the
antenna to the relevant place.
2.
Insert SIM cards.
Push the SIM card into the card slot on the front panel.
3.2.3 Power Connection
Once users have made sure that device installation, cable connection and power type are correct,
please switch on the power. Then NeoGate will start booting. In the meantime, users would see
that the “POWER” and “RUN” indicator lights turn on.
Please switch off the power before plugging or unplugging the cables.
3.2.4 Indicators Status
When power is connected, users should be able to find that the “Power” indicator, “RUN”
indicator, and GSM port status indicator beside the slot that has installed SIM cards turn on.