TG100 User Guide
21/75
6. (
Optional
) Set the Hotline number.
If you set hotline to a PBX extension number, the incoming call will be
routed to the extension directly.
If you set the hotline to the DID number of PBX’s inbound route, the call
will be routed to the destination of the inbound route.
Note
: If you don’t set a hotline number, you need a two-stage dial to reach the
destination number.
a. Set
Simple Mode
to
No
.
b. Set
Two Stage Dial
to
Yes
.
7. Click
Save
and
Apply Changes
.
When a call reaches the selected GSM/3G trunk, the call will be routed to the
destination of the PBX’s inbound route.
