background image

 

 

 

                         

NeoGate TG Series Installation Guide   

http://www.yeastar.com                                                               13/14 

 

Figure 4-2 NeoGate Admin Configuration Interface

 

Via the configuration interface, the admin can make all the system configurations, including network settings 
(LAN, Firewall, VPN, DDNS, VLAN, etc.); system parameters configuration (time zone, password, etc.); internal 
settings (Web access port, etc.); route lists; module lists; call logs (search, download); firmware update and 
reset, etc. 

 

Please note that after saving the changes, remember to click the “Apply Changes” button to make the 

changes take effect. 

 

4.3 Network Settings 

After logging in the admin configuration interface, generally the first step is to configure the IP address. If the 
LAN ports are connected to the network, their IP addresses need to be configured. If not, just configuring the 
IP address of the LAN port which is connected to the local area network of the company is OK.    

 

LAN Settings 
Click “Network Preferences”->”LAN Settings” on the left menu bar of the web configuration interface. 
LAN port is used for the interoperability of IP terminals and NeoGate. If the LAN port is connected to the 
company’s LAN, please configure the correct IP address and corresponding subnet mask.    

   

Please note that after changing the IP address of LAN port, NeoGate should be rebooted to make the new 

changes taking effect.   
 

4.4 Make and Receive calls 

NeoGate TG Series supports SIP Peer mode. Users should be able to make and receive calls after configuring 

Summary of Contents for NeoGate TG100















Reviews: