TG100 User Guide
45/75
Configure System Settings
Change Web Login Password
It is highly recommended that you change the system password after first login.
Procedure
1.
Navigate to
System
>
System Preferences
>
Password Settings
.
2.
Enter the old password first.
3.
Enter a new password and retype the new password to confirm.
A strong password is comprised of letters, numbers, and characters.
4.
Click
Save
, you will be automatically logged out.
Change Date and Time
You can adjust the time of TG gateway (including the time zone) to make it consistent
with your local time.
Procedure
1.
Navigate to
System
>
System Preferences
>
Date and Time
.
2.
Select your current and correct
Time Zone
.
3.
(Optional) Enable the
Daylight Saving Time
if you need it in your place.
4.
Select
Automatically Synchronize With An Internet Time Server
, and enter the
NTP Server address
. The system will adjust its internal clock to a central network
server.
Note
: Make sure the system can access the Internet.
5.
You can also select
Set Date & Time Manually
and enter the date and time.
6.
Click
Save
. A reboot prompt will display on the bottom of the web page.
