NeoGate TG Series User Manual
http://www.yeastar.com 50/56
2) Advanced route
Figure 7-30
When simple mode is set as “No”, you can check the advanced settings.
Items
Description
Route name
A name for this route
Call Source
Choose the trunk where incoming call comes from
Inbound caller pattern
Match the prefix of caller ID for incoming calls.
Hover the pointer over to read tips.
Enable Callback
Choose whether call back is enabled, you can
configure the advanced call back settings in part:
7.3.4.
Call Destination
Choose the destination trunk to route the call to
Hotline
When it’s configred, this number will be dial via
destination trunk permanently
Outbound Dial Pattern
Outbound calls that match this dial pattern will
use this outbound route. Hover the pointer over
to read tips.
Strip digits from front
before dialing
Allow the user to specify the number of digits that
will be stripped from the front of the phone
number before the call is placed.
Prepend these digits before
dialing
These digits will be prepended to the phone
number before the call is placed