TB200/400 Installation Guide
7/11
3. TB200/400 Installation
To avoid unexpected accident, personal injury or device damage, please read the
following instructions before installing the Gateway.
3.1 Placement Instructions
Ambient Temperature: to avoid overheating, please do not run TB200/400 in the
place where the ambient temperature is above 104°F (40°C).
Ventilation: please make sure that the device has good ventilation around.
Anti-jamming: there may be some sources of interference that might affect the
normal running of the Gateway. It’s highly recommended that the device
Should be placed away from high-power radio, radar transmitters and high
frequency, and high-current devices.
Is using independent power junction box and effective anti-grid interference
measures have been taken.
Mechanical load: Please make sure that the device is placed steadily to avoid any
accident that might cause damage. If placed on the desktop, please ensure it is
horizontally placed.
3.2 Installation Instructions
Place the Gateway in a suitable place, and then connect the power adapter and all
other cables to complete the installation.
3.2.1 Connection of Ethernet Ports
TB200/400 provides one 10/100M adaptive RJ45 Ethernet LAN port.
LAN Port Connection
Connect one end of a network cable to the LAN port of the Gateway, and the other
end to any port of company’s LAN switch/router.
If the LAN port is connected to PC directly (not via a switch), please use cross-over
cable.
3.2.2 Connection of BRI Ports
The BRI port could be connected to the BRI line and the BRI port of a traditional PBX
with a BRI RJ45-RJ11 cable.
