TG Series User Guide
67/104
Procedure
1.
Navigate to
System > System Preferences > Date and Time
.
2.
Select your current and correct
Time Zone
.
3.
(Optional) Enable the
Daylight Saving Time
if you need it in your place.
4.
Check Synchronize with NTP Server, the system will adjust its internal clock to a central network
server. If you choose this method, make sure that the system can access the Internet.
5.
You can also choose Set up Manually and enter the time with numbers.
6.
Click
Save
, a reboot prompt will display on the bottom of the web page.
7.
Click
Reboot Now
to reboot the TG gateway.
Upload Custom Prompts
The default voice prompts and announcements in the system are suitable for almost every situation.
However, you may want to use your own voice prompt to make it more meaningful and suitable for
your case. In this case, you need to upload a custom prompt to the system and apply it to the place
you want to change.
Prerequisite
Yeastar TG gateway supports .WAV, .wav, and .gsm audio file. The audio file size must be smaller
than 8 MB. The supported wav file format:
PCM 8K 16bit ,mono bit rate 128kbps
law(g.711) 8k 8bit 64kbps
u-law(g.711) 8k 8bit 64kbps
gsm 6.10 8k 13kbps
Procedure
1.
Navigate to
System > System Preferences > Custom Prompts
, click
Upload a Prompt
.
Summary of Contents for TG400G
Page 23: ...TG Series User Guide 23 104 ...
Page 104: ...TG Series User Guide 104 104 ...
