NeoGate TE200 User Manual
39/42
Example 2:
1NXXNXXXXX
will match a phone number starting with a 1,
followed by a 3-digit area code, and then 6-digit number.
DID number:
Define the expected DID Number if this trunk passes DID on incoming calls.
Leave this field blank to match calls with any or no DID info. You can also use
pattern matching to match a range of numbers.
DID Associated Number:
Define the extension for DID number. This field is only valid when you use BRI,
SIP, SPS or SPX trunk for this inbound router. You can only input number and
‘-‘in this field, and the format can be xxx or xxx-xxx. The count of the number
must be only one or equal the count of the DID number.
Handle matched incoming calls:
choose the trunk or trunk group to route the incoming calls to.
Outbound Dial Pattern
Outbound calls that match this dial pattern will use this outbound route. There
are a number of dial pattern characters that have special meanings:
X
: Any Digit from 0-9
Z
: Any Digit from 1-9
N
: Any Digit from 2-9
[12345-9]
: Any digit in the brackets (in this example, 1, 2, 3, 4, 5, 6, 7, 8, 9)
The “
.
” character will match any remaining digits. For example, “9011.” will
match any phone number that starts with “9011”, excluding “9011” itself.
The “
!
” will match none remaining digits, and causes the matching process to
complete as soon as it can be determined that no other matches are possible.
Example 1:
NXXXXXX
will match any 7-digit phone number.
Example 2:
1NXXNXXXXX
will match a phone number starting with 1, followed
by a 3-digit area code, and then 6-digit number.
Strip digits from front before dialing
Allows the user to specify the number of digits that will be stripped from the
front of the phone number before the call is placed. For example, if users must
press 0 before dialing a phone number, one digit should be stripped from the
dial string before the call is placed.
Prepend these digits before dialing
These digits will be prepended to the phone number before the call is placed. For
example, if a trunk requires 10-digit dialing, but users are more comfortable
with 7-digit dialing, this field could be used to prepend a 3-digit area code to all
7-digit phone numbers before calls are placed.