NeoGate TE200 User Manual
9/42
4.1.2 E1/T1 Status
Figure 4-2
E1 Trunk
Status
Comment
Connected successfully; data stream on the trunk is normal;
but the trunk may not work if there is something wrong with
the E1 trunk communication protocol.
E1 line has been connected to the port; PRI is in
corresponding or can’t communicate.
The port doesn’t have E1 line connected.
Status of each channel of the E1 trunk:
Status
Comment
Down
The Channel is not connected.
Idle
The channel is idle, ready for use.
Answered
The channel is busy in a call.
Accepted
The channel has accepted the call, but the phone
does not accept the call, i.e. the phone is ringing.
Dialing
The channel is dialing out.
Offered
The channel is accepting an incoming call.
Disconnected
The channel is requesting to hang up, but the line
hasn't be released by the other end.
Blocked
At least one end is being blocked on the channel.
Unknown
The channel is being used in a non-call way, or status
unknown.
DChan
D channel, the control and signaling information is
being carried.
4.1.3 Network status
In this page, the IP address of LAN and WAN port will appear with their status.