How to Reset
Disconnect the power. Press the power button and
reconnect to the power supply without
release. Hold the button for five seconds until the lightstrip
flows in red, green, and blue, and turns
to yellow. Then, release the button. Reset is completed.
* Please reset the lamp before using it in a new network
environment.
Apple HomeKit Smart Control
1. Open the Home APP in your iPhone or iPad.
2. Click “+” button, and add accessory as per the prompts in
the app. Scan the QR code on the right or under the
product base. Alternatively, input the 8-digit code shown
above the QR code to complete the access.
*
Make sure the Wi-Fi network is available and you can get
access to the internet properly. This product is not
compatible with 5G network.
*
To ensure proper Homekit compatibility, it is
recommended to use iOS 9 or above.
*
HomeKit codes are indicated under the base of contorllor.
Please be noted that HomeKit codes are required for reset
every time.
5
