P MV 1841 Reference Manual - Rev 1.1
Page 3 of 17
Product Description
The P MV 1841 is a 3G/HD/SD-SDI Quad Split MultiViewer with an HDMI output. In addition to
the quad split functionality, the module can also accept a quad link 12G 4k.
The PMV 1841 is a compact quad split multiviewer ideal for applications needing basic quad split
multiview capability into an HDMI monitor. Four SDI inputs are supported with a single HDMI
output. The module has three basic modes of operation; Quad Split, Full Screen and 4K
Monitoring.
The module is simple to setup and configure using the integrated local control and on screen
menu system. All settings are automatically stored in flash RAM. USB is port is provided for
firmware updates and also PC/MAC control using the yelloGUI application.
Controls and Connections
On Screen Menu
To access the on screen menu press the control knob on the side of the module (press and hold
for 3 seconds if “lock” functionality is activated – see “General” for detailed description). Turn the
control knob to navigate through the menu. To enter a desired menu press the knob again.
To get back to the lower menu level, press the knob while the “back” entry is highlighted.
The on screen menu will automatically switch off after 5 seconds if not used or you can use the
Exit entry at the bottom of the root menu.
