background image

Yellow Diving heating system manual 

 
 

 

 

Before  every  dive  battery  packs  should  be  checked  and 
charged  according  to  the  following  instructions.  Battery 
packs are not serviceable. 
  
Charging directions: 
 

1.  Connect  a  charger  to  the  electrical  power 

outlet. 

2.  Connect  charger  into  battery  pack  using 

banana  connectors  –  red  connector  into 
the  red  socket,  black  connector  into  black 
socket. 

3.  Charger  indicator  LED  lights  red,  when 

charging  cycle  is  finished  switches  to 
green. 

 

Automatic  charger  does  not  need  user  maintenance.  Li-Ion  batteries  do  not 
suffer  memory  effect.  Could  be  charged  when  discharged  only  partially.  Battery 
cells producer advises to charge pack every three months, when not in use.

 

 

Heating vest 

PERCH  HU

  –  breathable  „body”  type  with  a  very  flexible  heating  wire,  to  be 

weared  directly  on  naked  body.  Equipped  with  heating  power  regulator,  two 
steps,  50%  and  100%.  Besides  heating  function,  takes  the  important  role  of 
thermo-active underwear, to keep sweat out of the body. 
  
Thin layer of fabric neither constrains diver body movements, nor creates an air-
trap.  Contiguous  in  shape  does  not need high temperatures to heat diver body, 
the whole system is energy-saving, what effects in longer burn-times.  

 

Heating  vest  is  manufactured  from  material  limiting  formation  and  retention  of 
unpleasing  odours  after  usage.  Hand  washing  is  possible  (30°  C)  with  usage  of 
washing  agents  suitable  for  thermo-active  wear.  After  washing  do  not  wring, 
hang loose to drain, dry well. Do not iron, do not dry in automatic dryers. 

 

Heating gloves 

HOT GLOVES

  - 

gloves manufactured from breathable fabric with a very flexible 

heating  wire,  to  use  directly  on  bare  hands.  Besides heating - used fabric helps 
to keep sweat away from the skin. 
 
Thin  layer  of  fabric  and  thin  flexible  heating  wire  allow  full  mobility  of  diver’s 
hands. Contiguous shape eliminates a need for high temperatures  to heat diver’s 
hands, what allows for energy-saving design, what effects in longer burn-time. 
 
Gloves  are  manufactured  from  material  limiting  formation  and  retention  of 
unpleasing odours after usage. 
 

 
 

 

Summary of Contents for THERMOV










Reviews: