11
slave unit are controlled by master unit, and its function is
synchronized with the current function of the master units
5. Instructions and remarks
Warning, danger of electric shock
The light source inside this lamp should be replaced by the company
or our service agent or a person with similar qualifications.
1. Check whether the power supply and voltage are normal before
use. If the voltage fluctuates greatly, it is recommended to use
voltage stabilizer or voltage regulator for power supply.
2. This equipment belongs to the first class protective light and the
product power cord must be grounded and well grounded when used
3. The cover temperature of this equipment is 40-50
℃
at work, do
not touch the cover.
4. The internal components of the equipment must be purchased from
the manufacturer.
5. When using controller, try to avoid signal interference
sources (example: wireless intercom, high-frequency transmitter,
etc.)
6. When using this product, a maximum of 20 identical products can
be controlled within 20 meters of the same signal line. If exceeding
this range, additional signal amplification equipment is needed to
amplify the signal before it can be used.
7. The light source in use must be controlled within the service time
