background image

21

www.yellowtec.com      

I

      info@yellowtec.com

Power Management

How do I 

check my battery capacity

When the iXm is powered up and you are not recording you can always 

recall the remaining battery power and the remaining memory capaci-

ty. To indicate the remaining time to go simply hit the STOP (2) button 

on the Dashboard. First, the BAT LED will slow-flash yellow followed by 

a yellow slow-flashing MEM LED. Each flash indicates the approximate 

equivalent of one hour of remaining BAT or MEM capacity. Use this 

function regularely to assure that your required recording time is safe. 

 

NOTE:   This function only works in Record Ready Mode, not  

 

while recording.

 

NOTE:   When the remaining battery life falls short of one  

 

hour you will be automatically warned. The BAT LED on the  

 

Dashboard will start flashing amber. The last five minutes of  

 

battery life are indicated by the BAT light on the Dashboard

 

flashing red.

What‘s my iXm‘s 

operating time

?

Your iXm‘s total operating time is determined by a combination of two 

power sources: an internal Li-Ion battery and an additional three AA 

batteries. Fully charged, the internal Li-Ion battery provides a minimum 

of 8 hours of operating time. Three AA batteries offer an additional 

minimum operating time of 6 hours. You can insert the AA batteries 

into the battery compartment of the PORT PANEL. In combination they 

will give you a minimum of 14 hours of operating time.

You can select which battery source (AA batteries or interal battery) will 

be used first. Selection is made in your iXm‘s user software. (See section 

`User Software´).

 

NOTE:   The remaining recording time is a combination of

 

memory space and battery life. Check that you have enough

 

memory space left on your SD Card for your next

 

recordings. (see: How to check my storage capacity?)

 

NOTE:    Battery life might be less than indicated due to  

 

low temperatures. It is recommended to fully charge the  

 

iXm once a month to ensure your iXm‘s operating ability.

Summary of Contents for iXm





































Reviews: