POSITION C
REFERENCE TIME SETTING
When travelling, to adjust reference time only (without affecting the local time display), unscrew the
crown and then pull it out to the first notch
(
POSITION C
).
Set the reference time using the 24-hour hand that moves in increments of 30 minutes (against the
graduations on the bezel) and the minute hand (against the graduations on the dial) by turning the
crown clockwise.
IMPORTANT : If your GMT hand is off by one hour after adjustment, you will need to return to the
time-set position in order to turn the H+M hands again one hour forward then return to the desired
position before screw the crown back on. (This allows the cog to train well and not skip a tooth).
OR
You first index the GMT hand in relation to the number of hours of time difference desired, then set
H+M and GMT will follow.
Push in and then screw down the crown.