14
By pressing UP (
▲
) or DOWN (
▼
), and Enter ( ) button, select your desired Squelch level from 0 to
4. ( 0 means the strongest level and 4 means the weakest level) To exit from menu, press M
button or PTT switch)
6.8.8 Weather On/Off selection:
To enable weather (WX) mode, do a quick press of red button on top of radio.
LCD will display WX mode. Press UP (
▲
) or DOWN (
▼
) button to move through WX channels.
To exit from WX mode, press red button again.
** Reminder : When WX mode is enabled, the radio will not transmit or receive talk
transmissions.
When WX is disabled, the radio will revert to it’s previous channel and mode of operation.
6.8.9 EMG (Emergency Alert Tone):
This function allows you to send out distress/locator signals in emergency situation. To activate the
emergency alert tone, press “Red Button” for more than 2 seconds.
The radio will send out a loud alert tone continuously. To deactivate the EMG function, press any
button on the radio.
** Reminder : To receive emergency alert tone, the receiving radio needs to be on the same
channel and tone settings.
Summary of Contents for XV-100A
