1-888-962-6554
www.YERFDOG.Com
15
Seat Installation to Chassis
1) Place a spacer (46) on the Threaded Studs and Align the THREADED STUDS
(on the bottom of the SEAT ASSEMBLY) with the SEAT BRACKET HOLES (on
the FUN KART FRAME)
2) Insert the THREADED STUDS into the SEAT BRACKET HOLES.
3) From UNDER the Fun Kart, secure the SEAT ASSEMBLY using four 5/16” flat
washers (64) and four 5/16” NYLOCK NUTS (34). See Figure below.
Figure 11
Threaded Studs
& Spacers
Seat Bracket Holes